LibertyCES — Engineering Line Direct: Call James Riggins at (559) 395-5500 — No sales queue. Real engineering answers.
Chemical Compatibility

Hydrostatic Level Sensor — Metal Plating & Photographic Process Solutions

Strong evidence

Named chemicals

plating line bath solutionsneutralization tank contentswaste sump liquorclarifier underflow

What LibertyCES's vendor documentation shows

Signet names Plating Lines and Neutralization Tanks explicitly among the 2250's applications, alongside inventory management, storage tank monitoring, waste sumps, clarifiers and overflow protection. The design justification is transferable: the flush ceramic diaphragm disregards false level signals from steam vapors, foam and surface debris, which is why hydrostatic beats acoustic in a fuming plating tank — Signet's own Level Application Suitability Matrix rates hydrostatic '+' for dense surface foam while rating 2260/2270 ultrasonic '-'. Two install requirements not to miss: the sensor's back-end capillary tube must be exposed to atmospheric pressure, and Signet says use the 2250 rather than the 2450 for anything mounted inside a tank.

Materials documented for this service

  • PVDF body
  • Ceramic diaphragm
  • FKM diaphragm seal and union O-ring
  • Selectable end-connector material: PVC, CPVC, PP-H, PP-N, PVDF

Products cited for this service

GF Signet 2250 Hydrostatic Level Sensor (0-10 psig / 0-23ft or 0-50 psig / 0-115ft; S3L or 4-20mA; flush ceramic diaphragm; PVDF, ceramic and FKM wetted; 0-0.7bar -XU or 0-3.4bar -XL; PVC-U union/bushing)GF Signet 2450 Pressure Sensor (0-10 / 0-50 / 0-250 psig, PVDF housing with ceramic diaphragm; end connectors and union nuts in PVC, CPVC, PP-H, PP-N or PVDF so the wetted path is matched to chemistry independently of the sensor body)

Sourced to

  • data/vendor-sources/gf-signet-instrumentation-catalog.md

Every material and product claim on this page traces to the vendor documentation listed above. Chemical compatibility depends on exact concentration, temperature, and duty cycle — confirm current specifications with the manufacturer and request a spec review before final specification.